Loft Conversion Industrial Penthouse

A photorealistic render of a converted top-floor loft penthouse in a former 1920s textile mill in Manchester, approximately 180 square meters on a single level with a double-height section at the east end. The building's original industrial fabric is preserved and celebrated throughout. Structure: Original steel riveted roof trusses (Warren truss form, approximately 800mm deep, fabricated from angle iron sections) spanning the full 18m width of the building, the rivets hand-painted in dark charcoal to match the matte black structural paint. Existing timber roof decking visible between the truss top chords, replaced where damaged with reclaimed pitch pine matching the original. The underside of the trusses is the finished ceiling — no plasterboard, no insulation visible, raw industrial. Walls: Original red brick (Accrington engineering brick, dark red-brown with high iron content and a slight sheen) on all external faces, repointed with a slightly recessed mortar joint in pale gray hydraulic lime. Internal partition walls: a single new intervention in polished black-painted concrete block, 200mm thick, creating the bedroom and bathroom separation from the open plan. Flooring: Original wide-plank pitch pine floorboards (200mm wide, reclaimed and sanded to reveal the honey-amber grain with dark resin pockets), laid in a straight-run orientation with the historic cut nail fixings visible. A large-format hand-knotted wool rug (3m x 5m) in a contemporary charcoal and rust geometric pattern anchors the seating area. Open-plan living: A generous kitchen-dining-living zone facing south through a row of original cast-iron framed factory windows (each 600mm wide x 2200mm tall, six panes each, single glazed replaced with slim double-glazed units preserving the frame profile), the panes slightly green-tinted as original. A long kitchen island (3600mm x 1000mm) in honed Nero Marquina black marble top on a custom welded steel base (25mm flat bar, matte black). Kitchen cabinetry in oiled walnut with recessed steel bar pulls. A refectory dining table in 80mm thick solid elm slab (3000mm x 1000mm) with visible wane edge, on trestle legs in blackened steel. Eight mismatched vintage industrial chairs around it. Seating: A large modular sofa in oatmeal boucle fabric (approximately 4m x 3m L-shape) with a low steel-framed coffee table in smoked glass. A single Arco floor lamp (polished stainless arc) over the reading corner with an original Charles Eames fiberglass chair in elephant hide gray. Double-height east end: The original hoist opening (1800mm x 2400mm) in the east gable has been converted to a floor-to-ceiling sliding steel and glass door opening to a cantilevered steel balcony (1800mm x 1200mm, open grating floor, black painted railings). The double-height void is occupied by a freestanding steel and timber library tower (custom fabricated, 5m tall, 1800mm wide) with rolling library ladder. Lighting: A combination of warehouse-style pendant lights (enamel dome shades in factory green, 400mm diameter, E27 filament at 2200K) hung at varying heights from the truss bottom chords, and concealed LED strip under kitchen cabinets and island. Late afternoon light from the south windows casting long shadow patterns of the window grid across the timber floor. Camera angle: Standing near the kitchen island looking diagonally toward the seating area and the double-height east end with the library tower. The roof trusses frame the composition overhead. Eye-level perspective (1.6m height). Focal length equivalent 24mm. Aspect ratio 16:9. Time of day: 4:30 PM, autumn, warm oblique light from the south windows.