Tag

CLT

2 Prompts
2 results

Prompts

Nordic Minimalist 17 seconds

Scandinavian Forest Retreat Interior

A photorealistic render of the main living space inside a small Scandinavian forest retreat, approximately 35 square meters, located among mature silver birch and Norway spruce trees in a Finnish forest. The structure is a compact rectangular cabin with a shallow mono-pitch roof (5 degrees) visible from the interior through a continuous clerestory window along the high north wall. Construction and materials: The walls are CLT (cross-laminated timber) panels, 120mm thick, left exposed on the interior with the lamination layers visible at cut edges. The CLT has been treated with a single coat of white pigmented natural oil, allowing the grain pattern to show through while giving a fresh, light tone. The ceiling follows the mono-pitch slope from 2.4m at the south wall to 3.2m at the north, clad in narrow-profile (70mm wide) tongue-and-groove white-oiled spruce boarding. Flooring: Wide-plank white oak (240mm width, 20mm thick), natural UV oil finish, very light tone. Underfloor radiant heating. A sheepskin rug (natural undyed cream, approximately 2m x 1.5m) under the sitting area. Furniture: A built-in sleeping platform along the south wall (2000mm x 1600mm, 400mm height, white-oiled birch plywood construction with integrated storage drawers below). A cotton duvet in white with a thin-stripe gray border, two feather pillows in white cotton. Beside the sleeping platform, a simple bentwood reading light (brass arm, white shade) mounted to the wall. Sitting area: Two simple armchairs (Scandinavian design, solid ash frame with natural finish, seat and back in undyed sheepskin) around a low side table in solid ash. A small stack of books and a ceramic mug with steam suggesting a hot drink. Stove: A small cylindrical cast-iron wood-burning stove (Morso-style, matte black finish, approximately 500mm diameter x 900mm tall) on a brushed stainless steel hearth pad, connected to a slim stainless flue pipe passing through the roof. A small basket of split birch logs with white bark beside the stove. Clerestory window: The continuous north-facing window (8m wide x 400mm tall) at ceiling height admits soft diffused north light into the room without direct sun, illuminating the spruce ceiling boarding in even cool white light. Through the main south-facing window (1800mm x 1200mm, frameless fixed glass in slim painted steel frame) the birch forest is immediately present — trunks at 1-3m distance, white and gray bark, sparse winter undergrowth, soft snow on the ground outside. Lighting: Predominantly natural. A single ceiling-mounted track with two adjustable spotlights (2700K warm) provides evening supplementary lighting. A small pendant (hand-blown smoke glass globe, 150mm, E27 filament LED) over the side table. Camera angle: Standing near the stove looking across the sleeping platform toward the south window and forest. Eye-level perspective (1.5m height). Focal length equivalent 28mm. Aspect ratio 3:2. Time of day: 10:00 AM winter morning, overcast soft light.

Mass Timber Commercial 21 seconds

Timber Mass Timber Office

A photorealistic render of an open-plan office floor in a new eight-story mass timber commercial building in Portland, Oregon, a post-and-beam CLT structure that exposes all structural timber elements as the primary interior finish. Structure: The floor plate (approximately 60m x 22m, open plan) is supported on a grid of glulam columns (340mm x 340mm, Douglas fir, clear grade with natural knot-free finish, a warm honey-amber tone) at 6m centers in both directions. The glulam primary beams (600mm deep x 200mm wide) and secondary beams (300mm deep x 140mm wide) are fully exposed below the CLT floor deck above (5-layer CLT panels, 175mm thick, the top laminate in clear Douglas fir showing the characteristic parallel grain pattern). All timber surfaces are factory-sanded to 180 grit and finished with a single coat of matte Rubio Monocoat in Pure (colorless, grain enhancing). Workspace layout: A mix of collaboration and focus zones across the floor plate — no assigned desks. Collaboration zones: clusters of four sit-stand desks (white laminate tops, black powder-coated steel legs, motorized height adjustment) with task chairs in light gray mesh. Focus zones: individual work pods defined by freestanding acoustic screens (100mm thick, natural wool felt in warm oatmeal, floor-mounted on minimal steel base frames). A series of meeting rooms are created by full-height glass partitions (frameless, 15mm glass, silicon-jointed) with sliding glass doors — the rooms open to the main floor visually but acoustically separated. Greenery: A continuous green wall (approximately 12m wide x 3m tall) of living moss and Epipremnum aureum (pothos) panels on the east-facing internal partition wall, the deep green providing a strong color contrast to the warm amber timber throughout. Windows: The full-height perimeter glazing (floor-to-ceiling, continuous around all four facades, 3.2m height) frames views of the Portland cityscape — the Pearl District streetscape, the West Hills with Douglas fir forest in the background, Mount Hood visible as a faint snow-capped cone in the far east on this clear day. Lighting: Primary natural light from the perimeter glazing. Supplementary: pendant lights (black powder-coated steel, cylindrical shade 300mm diameter) hung from the CLT ceiling at 2.4m below the deck on the column grid centers, providing warm 3000K task illumination. The timber ceiling absorbs and diffuses the light, eliminating harsh reflections. Camera angle: From the northwest corner of the floor plate looking diagonally southeast, the full depth of the open plan visible, the column grid receding in perspective, the green wall on the right, the Mount Hood view through the south glazing in the far background. Eye-level (1.7m). Focal length equivalent 24mm. Aspect ratio 16:9. Time of day: 10:00 AM, clear October morning, strong directional light from the southeast windows.